ASA-10mkII SPECIFICATIONS

FUNCTION OVERVIEW

Measurements & Judgments	1) Sound pressure level (SPL) frequency response 2) 2nd, 3rd and total harmonic distortion characteristics 3) Impedance characteristics 4) Phase characteristics 5) Sensitivity (S0) 6) Impedance (Z0)
Frequency Range	20 Hz ~ 44 kHz *User-definable range
Measurement Range	SPL: 80 ~ 150 dB SPL (with standard microphone sensitivity) Impedance: 1 ~ 200 Ω at 1 V
Auto Range	Available
Real-time Spectrum Analyzer (RTA)
No. of Channels	2-channel simultaneous display
Frequency Range	20 Hz ~ 44 kHz
Analysis Resolution	1/1, 1/3, 1/6 and 1/12 octave selection
Measurement input	Microphone line switchable
Display	・ Comparative view against your reference data ・ Max./min. hold ・ L/R difference display
Display Level Range	-110 dBV ~ 30 dBV: Line input 0 dB SPL ~ 150 dB SPL: Microphone input (standard microphone sensitivity)
Signal Output for Measurement	Pink noise spot sign wave
Integration Time	For sine wave, pink noise, SLOW
Filter Characteristics	Conforming to JIS and ANSI standards (including A-curve)
Impulse Response / Acoustic Delay / Wave Recording
Filter characteristics	1-channel or 2-channel selectable Input: Microphone/line switchable Output signal type: ・ TSP signal (time stretched pulse for impulse measurement) ・ Sweep sine wave: Frequency range selectable ・ Spot sine wave: Frequency settable
Synchronous Averaging	1 ~ 256 times

HARDWARE

Analysis Frequency Range	20 Hz ~ 20 kHz (sampling frequency 44.1 kHz / 48 kHz) 20 Hz ~ 40 kHz (sampling frequency 96 kHz)
Sampling	44.1 kHz / 48 kHz / 96 kHz 24 bit
No. of Channels	2
Line Input Range	3 mV ~ 10V / full scale, 14 dB step, 6 ranges
Microphone Input Range	80 ~ 150 dB SPL, 14 dB step, 6 ranges
Microphone Basic Sensitivity	-36dB/Pa
Input Sensitivity Accuracy	± 0.1 dB at 1 kHz
Input Frequency Response	± 0.3 dB 20 Hz ~ 40 kHz (sampling frequency 96 kHz)
Input S/N Ratio	75 dB (3 mV / 80 dB SPL range only 70 dB)
Input Terminal	Unbalanced line input RCA pin jack Unbalanced ultra-small microphone input LEMO connector Balanced microphone input LEMO connector Balance line input LEMO connector
Impedance Measurement Range	1 ~ 200 Ω When using impedance adapter / sweep measurement
A/D　D/A	24 bit 　2-channel
Power Supply	USB 2.0 or higher
Dimensions	192 (W) x 30 (H) x 167 (D) mm (including protrusions)
Weight	450 g
Operating temperature range	10 ~ 35 °C
Operating humidity Range	20 ~ 80 % RH
Accessories	1 USB cable, installation CD (with PDF manual)
OS	Windows 7 / 10

* Specifications are subject to change without notice.

｜Overview｜